RScan 250
RScan 250三维CT装有双X光源可检测各种工件，从微米级物体到缸盖均可。通过运用三坐标中采用的花岗岩底座机械手技术，Rayscan最适合用于微米级高精度不良检测、尺寸测量以及逆向工程。
RScan 250 is a 3D Computed Tomography system with two Xray sources for the inspection of a wide variety of parts, ranging from micro-objects to cylinder heads. Due to its direct Cone Beam CT (3D-CT) the complete volume data are generated within some minutes. By the application of granite based manipulator technology used in coordinate measurement systems, RayScan 250 is optimised for high spatial resolution in the micrometer range. Therefore RScan 250 is suitable for the detection of faults as well as for dimensional measurement and reverse engineering.
RScan 250 E additionally provides extended operation modes, which enables to overcome the limits of conventional CT. By using Region-of-Interest CT details or components in large objects are detected with nearly any degree of detail. All hardware and software components are integrated in one intuitive user-friendly interface, which allows to switch easily from one mode to the other.
Technical Data*
X-ray source: Microfocus 10 - 230 kV (opt. 300 kV)
Minifocus 50 - 450 kV (opt. 600 kV)
Focal spot: 3μm - 250μm and 0.4 mm/1 mm
Size of objects ø / H: 1 - 600 mm / 1 - 1500 mm
Max. weight of objects: 200 kg
Detector´s active area: 410 x 410 mm2
Number of detector-pixels (optional): 2048 x 2048 (4096 x 4096)
Digitising: 16 bit
Time for measurement incl. reconstruction: 2 - 30 min.
Resolution of detail: 1 μm and 0.1 - 0.3 mm
Contrast < 1 %
Modes of operation: 3D-CT and Radioscopy
Operational mode optional: Region-of-Interest CT
* Guide only, actual figures depend on material, maximum wall thickness, detector and source options.
Technical design and choice of components will be customised. Errors excepted.
Subject to change without notice.
